S P C E.com: March 24, 2016 Update - Assalamualaikum wr wb - saifulcomelektronik.com loyal readers for everything good afternoon, this time I will discuss and share for you, about the free energy magnet motor of a mechanical energy source DVD secondhand computer. As the figure below the results of the experiment I did myself.
What if you want I did try this at home please wrote, because the material is quite simple and easy to be around your area in your local electronics stores. Components - components that are needed include:
1. Two Fun computer
2. 10000 micro farad capacitors 80 V
3. diodes (diode 4 feet)
4. Semi 0:33 farad capacitor Micro
7. enough cable
8. Former mechanic DVD Computer
Eight (8) points above the soldering process is now complete for the components that connect one with the other. Note the scheme below :
1. Pin LED / FUN positive positive pin plug to 10000 nf capacitors, as well as LED pin negative to negative pin capacitor nf 10000
2. Capacitors connect the positive pin to pin diode positive and negative pin capacitor to the negative pin diode
3. Pin diode plug it into an AC 1 frid winding, winding pin capacitor frid positive to 0:33 nf
4. 2 AC pin diode connect to negative capacitor pin
5. And lastly connect the capacitor positive pin to pin 1 dynamo mechanic DVD, connect the capacitor negative pin to pin 2 of the computer mechanics DVD
After all linked images above scheme correctly, pull and push the mechanical computer DVD, LED / FUN will move rotate and the LED lights up. Click Play colored red to see the video. Good luck,….
This only can I share (sharing) about Free energy magnet motor, from a former mechanic DVD Computers, may helpful friend - a friend, and helpful also for everyone. There is also I say thinks you for visiting my website simple. And also look forward to the next article more interesting only in www.saifulcomelektronik.com